Thomas A. Iglesias Posted November 30, 2007 Share Posted November 30, 2007 I am about to change both engine mounts to correct a slight resonance felt in the steering wheel and accelerator pedal at 1,200 rpm under load. I have already changed the transmission mount which took care of most of the above. Are there any precautions I should take while changing out the mounts? Please advise. Thanks all. Quote Link to comment Share on other sites More sharing options...
jzz30 Posted November 30, 2007 Share Posted November 30, 2007 buy some universal joint sockets in i think 14mm and you may need a 12mm it makes life much easier. or you can get away with just the univesal joint adaptor but i think its a little harder. Quote Link to comment Share on other sites More sharing options...
Thomas A. Iglesias Posted December 1, 2007 Author Share Posted December 1, 2007 Thanks for the advice on the tools! buy some universal joint sockets in i think 14mm and you may need a 12mm it makes life much easier. or you can get away with just the univesal joint adaptor but i think its a little harder. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.