Jump to content


Recommended Posts

Posted

I was wonder what is involve in repairing the cigarette lighter in a 2001 IS300. I checked the fuses and they all look good. I don't want to take it to the dealer if it is an easy fix.

TIA

Posted
You should be able to pull the ligher socket up a little and check the wires. Sometimes those get broken.

Thanks, is this a regular part I can get anywhere or have to be from dealer?

Posted
I was thinking more of splicing the wires if one is broken or diconnected.

urms... that is splicing... is there any instructions on how to do everything... my cig. lighter died a couple weeks ago... i am so going nuts because it's just not one ..it's the one inisde that little pocket box too...?? i seriously need help..don't know nothing about cars...and can't afford to take it to the shop if i could get instructions and find a friend to do it for me..?

Posted

Sometimes something metallic falls into the cig lighter socket and shorts it out. One guy found a dime in his. So be sure and check the fuse in the drivers kick panel first.

Sometimes the whole lighter socket pulls up when the ligher is removed, and the wires underneath get unplugged.

Here's a pic of how to pull up the shifter panel so you can see under the lighter.

shifterring.jpg

the chrome ring around your shifter is easy to remove, just stick a flat tool between the chrome ring and the plastic console and pry, I used a thin butter knife. the ring is connected and a part of the bottom of shelf, so the lighter and its components are attached- as well as the light components for the ashtray, this is the whole bottom shelf for the cubby.

cubby.jpg

had to turn the car on and shift into d (while holding the brakes) to completely remove the ring/shelf assembly

http://my.is/forums/f90/dissecting-interio...nt-pics-117217/

Posted
Sometimes something metallic falls into the cig lighter socket and shorts it out. One guy found a dime in his. So be sure and check the fuse in the drivers kick panel first.

Sometimes the whole lighter socket pulls up when the ligher is removed, and the wires underneath get unplugged.

Here's a pic of how to pull up the shifter panel so you can see under the lighter.

shifterring.jpg

the chrome ring around your shifter is easy to remove, just stick a flat tool between the chrome ring and the plastic console and pry, I used a thin butter knife. the ring is connected and a part of the bottom of shelf, so the lighter and its components are attached- as well as the light components for the ashtray, this is the whole bottom shelf for the cubby.

cubby.jpg

had to turn the car on and shift into d (while holding the brakes) to completely remove the ring/shelf assembly

http://my.is/forums/f90/dissecting-interio...nt-pics-117217/

thank you... thank you....

  • 2 weeks later...
Posted

sounds like a fuse is blown to me, usually caused by people leaving their phone charger in the damn thing all the time, then the wire comes into contact with something in the car, grounding the connector, blowing the fuse, just because the fuse looks good doesnt mean it tests good

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...

Forums


News


Membership


  • Unread Content
  • Members Gallery