chilkoot Posted April 8, 2007 Share Posted April 8, 2007 the motors and mechanisms seems to be identical, the bolt up was straightforward. the only problem I encountered was that the connectors changed between 90' and '93. cutting the plug off of the '90 window motor and splicing the connector from the dead '93 motor was elementary. a few feet of electrical tape and a new wire stripper later everything worked fine. it's a direct transplant, just make sure you don't toss your window motor without cutting the 2-pin connector off first, just in case. props to LexLS.com for helping me get the door panels off without mangling them. also, when replacing the door panel be careful not to let the black silicone sealant from the plastic sheets come into contact with the door lock rods, I need to take apart my door panel again tomorrow because of friction with the door lock mechanism that causes it to stick slightly. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.