300gone330 Posted March 25, 2007 Share Posted March 25, 2007 Through two unsuccessful refills, and removal of all rear window stickers and suspect offending glues, the rear wiper arm still does not clear a 2 1/2 inch radius near the top of the window (apx 1 1/2 inches down from the top of the arm's tip). I have brought this to the dealer's attention three times now, each time leaving with a wiper not doing its job. Is there a tensioner adjustment to make the arm angle in more to make better contact with the window? Is there a trick to doing this without overtightening/risking scratching the window by a wiper arm pulled too taught? Quote Link to comment Share on other sites More sharing options...
Grumpa72 Posted March 25, 2007 Share Posted March 25, 2007 I believe that there may be a TSB on this for early cars and it is certainly worth asking your service department. With that said, I took my '05 330 in for the very same reason and they said that there wasn't anything that they can do for my car. To spend $40000+ dollars for a car that doesn't wipe the rear window adequately is a bit of a surprise. Quote Link to comment Share on other sites More sharing options...
newtoncd Posted March 25, 2007 Share Posted March 25, 2007 I think the TSB is # BO008-04. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.