Jump to content


Recommended Posts

Posted

I have a 2001 ES and the female end of the seat belt is not visible. I suspect it is under the rear seat. How do I remove the rear seat to check? Thanks.


Posted

grab the seat down lown where is meets the carpet behind your calf. Give a good tug at each end and in the middle. This should release it from the clips. Then lift up and out away from the back of the seat.

Connect the seat belts to help them stay up out of the way and then replace the bottom part of the seat making sure are three sets of seatbelt parts are still above the seat part going in. Sometimes a second pair of hands is helpful.

You may have to smack the cushion of the seat again to get the clips to secure.

or you could just reach down in between the cushions and fish around, it can't go far.

steviej

Posted

grab the seat down lown where is meets the carpet behind your calf. Give a good tug at each end and in the middle. This should release it from the clips. Then lift up and out away from the back of the seat.

Connect the seat belts to help them stay up out of the way and then replace the bottom part of the seat making sure are three sets of seatbelt parts are still above the seat part going in. Sometimes a second pair of hands is helpful.

You may have to smack the cushion of the seat again to get the clips to secure.

or you could just reach down in between the cushions and fish around, it can't go far.

steviej

Thanks for the tip. I have fished down between the cushions and I can feel the middle belt, but not the female end of the outboard belt. If I had stuck my hand in any further I'd have to remove the seat to find my hand also!! Thanks again.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...

Forums


News


Membership


  • Unread Content
  • Members Gallery