Jump to content


Recommended Posts

Posted

When I was removing the power steering pump I noticed the two hoses that connect to the valve were already removed accidentally. I am not sure as which hose goes to which "port" on the valve. Anyone know one hose goes from the valve back into the intake manifold/throttle body and the other hose goes back towards the fire wall I think.

Posted

When I was removing the power steering pump I noticed the two hoses that connect to the valve were already removed accidentally. I am not sure as which hose goes to which "port" on the valve. Anyone know one hose goes from the valve back into the intake manifold/throttle body and the other hose goes back towards the fire wall I think.

What about this... If the hoses on the air control valve were installed backwards would the car have more of a tendency to stall out while making turns at lower rpm's.

I just want to make sure I have those hoses hooked up properly.

  • 4 months later...
Posted

i think it can go either way.

the air control valve varies steering effort dependant on engine speed.

Posted

Thanks I think your right also. I put on the vacuum hoses on and it works fine. I don't think it matters either. Just wasn't too sure as I did not see them connected before removing the pump.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...

Forums


News


Membership


  • Unread Content
  • Members Gallery