Jump to content

Diagnostic Code 45


Paul Sherman

Recommended Posts

Good Morning:

I have a '93 LS400 with 178K miles on it.

The 'trac' light was coming on sometimes (tires not slipping),

which implied a problem being logged. Sometimes, when it

happened while the engine was cold, the car would hesitate and

surge a little.

Using the info you all provided, I got the car into diagnostic mode

and it came up with

45 "When idle switch ON, main throttle position sensor signal

is 1.5V or higher"

What does that mean, and what do I do to fix it?

Again, this is one of the best support sites I've seen.

Thanks to all.

Link to comment
Share on other sites

Might try cleaning the TPS sensor as your code indicates wrong voltage at idle. I don't know how you clean it, but someone has mentioned it. Also the TPS on your TRAC (if you have it) is apparently the same. Could try swapping the sensors. If this works, just buy a new TPS.

Good luck

Larry

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Forums


News


Membership