Jump to content


Recommended Posts


Posted
my car has reached 70,000 miles and ive never had the valve clearence checked nor adjusted? should i have this done?

do u hear a taping that increaces with rpm? because that is the noize that tells u you need a valve adjusment.

Posted

during initial start up i hear it as the car is idling, but im not sure if its continuous with acceleration.

any idea on the price of getting it checked and adjusted? (im taking it to a toyota dealership tomorrow)

Posted
during initial start up i hear it as the car is idling, but im not sure if its continuous with acceleration.

any idea on the price of getting it checked and adjusted? (im taking it to a toyota dealership tomorrow)

i have a different engine, but i have almost 145K and its never been done according to what little service records there are, mine are working fine :)

Posted
my car has reached 70,000 miles and ive never had the valve clearence checked nor adjusted? should i have this done?

Your owners manual says the valve clearance should be checked at 60,000 miles. You can skip this service if:

- you don't care about maintaining optimum engine power, smoothness, quietness and fuel economy

- you don't care about achieving maximum engine life.

Posted
my car has reached 70,000 miles and ive never had the valve clearence checked nor adjusted? should i have this done?

Your owners manual says the valve clearance should be checked at 60,000 miles. You can skip this service if:

- you don't care about maintaining optimum engine power, smoothness, quietness and fuel economy

- you don't care about achieving maximum engine life.

motion carried to have it done....im definently having it done

Posted
my car has reached 70,000 miles and ive never had the valve clearence checked nor adjusted? should i have this done?

Your owners manual says the valve clearance should be checked at 60,000 miles. You can skip this service if:

- you don't care about maintaining optimum engine power, smoothness, quietness and fuel economy

- you don't care about achieving maximum engine life.

motion carried to have it done....im definently having it done

Before you go and just have it done. Have your tech do an audible check on the valves. Valve adjustment is a pricey procedure, so I would have it checked first and then go from there.

Posted
.im definently having it done

Your next challenge is to find a tech with meticulous work habits - one who cares about accuracy and doesn't have a "this is good enough" attitude about valve adjusting. An audible check is not very accurate because it cannot detect overly tight valves (because tight valves are quiet) and by the time a valve cleanance is loose enough to make a ticking noise then it is severely loose.

Yes checking valve clearances manually is a bit expensive labor wise and one way to save money is to have the clearances checked when the timing belt is changed because the labor needed to perform both tasks is, in part, dupicated.

Posted

What kind of costs can one expect when having this service done? I've never had to have any adjustments to any engine on a car I have owned other than routine maintenance. :blink:

:cheers:

Posted

STOP THE PRESS.....HOLD THE MAYO

i didnt get the valve clearence check, because the technicians said it would cost me $350 not including labor or parts (new gaskets) and take about 5 hours.

being that i dont have that much to throw down, ill have to wait on that.

Posted
STOP THE PRESS.....HOLD THE MAYO

i didnt get the valve clearence check, because the technicians said it would cost me $350 not including labor or parts (new gaskets) and take about 5 hours.

being that i dont have that much to throw down, ill have to wait on that.

Yup, knew it was going to be expensive. I could only imagine it would be even more expensive if you took it to Lexus.

Posted
.im definently having it done

Yes checking valve clearances manually is a bit expensive labor wise and one way to save money is to have the clearances checked when the timing belt is changed because the labor needed to perform both tasks is, in part, dupicated.

This is not true. Checking valve clearance doesn't require removing the timingbelt. Valve clearance job will cost around $350-$500. It does take time.

JP Importz

Posted

A job like this need to be done after only 70,000 miles? :unsure: I haven't seen this type of repair (service) called for that often, if at all. :huh:

:cheers:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...

Forums


News


Membership


  • Unread Content
  • Members Gallery