Mr_Ferrari Posted June 21, 2004 Share Posted June 21, 2004 Could someone tell me the cowfoot tool size to removal the inner tie rod? Does anyone has the procedure from the service manual? The information below is from Lexus/Toyota steering housing overhaul tool set. I know one of the tools is a 34 mm crowfoot wrench. 09612-24014 STEERING HOUSING OVERHAUL TOOL SET 09616-10010- STEERING PINION BEARING ADJUSTING SOCKET 09616-10020- STEERING PINION BEARING ADJUSTING SCREW WRENCH 09617-22030-01- STEERING RACK END WRENCH 09617-22040- STEERING PINION BEARING ADJUSTING SCREW LOCKNUT WRENCH 09617-24011- STEERING RACK WRENCH 09617-24020- STEERING PINION BEARING SCREW LOCKNUT WRENCH 09617-24030- STEERING RACK END WRENCH (34MM) 09612-10022- HEXAGON WRENCH 09612-10050- STEERING RACK SHAFT BUSHING REPLACER 09612-10061- STEERING PINION BEARING REPLACER 09612-24022- CASE 09613-22011- PULLER I know I need to buy the service manuals. ;) Quote Link to comment Share on other sites More sharing options...
jzz30 Posted June 21, 2004 Share Posted June 21, 2004 i nwent out and bought a big monkey wrench. like a 1 and 1/2 inch one that will fit about right. 1 inch is 25.4mm +1/2 which is 12.7= 38.1 so that fits right? well i used it and get a good wrench. because cheap ones go off on the setting when you give it touque Quote Link to comment Share on other sites More sharing options...
Mr_Ferrari Posted June 22, 2004 Author Share Posted June 22, 2004 Thanks jzz30! I thought about the exact same thing, but I did not want to possible damage the nut. I did find a service metric wrench 15-piece set for $50 at overstock.com. Plus I purchase a thin beak jaw adjustable wrench and plastic jaw covers at Sears. Quote Link to comment Share on other sites More sharing options...
99lsguy Posted June 22, 2004 Share Posted June 22, 2004 here's some torque specs........... comp.pdf Quote Link to comment Share on other sites More sharing options...
Mr_Ferrari Posted June 22, 2004 Author Share Posted June 22, 2004 here's some torque specs........... Thanks 99lsguy! Quote Link to comment Share on other sites More sharing options...
mossyoak Posted June 22, 2004 Share Posted June 22, 2004 On the Website I use for my 300ZX nissan, they have a on-line motor/shop manual. I dont know who or how, but maybe someone can put an on-line LS400 manual on this site. I will try to find out how its done. HOpe the management reads this ( Just what they need ,,,more work!) Ferd/ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.