Jump to content

  •  

Photo

Can't Program Seat Memory After Battery Replacement


  • Please log in to reply
1 reply to this topic

#1 fuguzilla

fuguzilla

    New Club Member

  • Regular Member
  • Pip
  • 2 posts
  • Model: GX470
  • Location: Please Select

Posted 10 August 2009 - 12:33 PM

Have 2004 GX470 - finally the battery died... Had no choice but replacing the battery in the parking lot knowing there are many things won't work after the battery replacement.

I read the forum and was able to fix the window control from driver side.

But I haven't seen any post regarding to the problem with programing the driver seat. Currently I can't program it.

In addition, any other issues that I need to be aware of ?

Sounds like this should be part of the FAQ...

Thanks for any help.

Have something to contribute?

Sign in or register to start a topic...

 

#2 NicLX470

NicLX470

    LX470 IS350

  • Super Moderator
  • 430 posts
  • Model: 1998 LX470, 2009 IS350, 2009 Nissan Cube

Posted 10 August 2009 - 01:20 PM

Have 2004 GX470 - finally the battery died... Had no choice but replacing the battery in the parking lot knowing there are many things won't work after the battery replacement.

I read the forum and was able to fix the window control from driver side.

But I haven't seen any post regarding to the problem with programing the driver seat. Currently I can't program it.

In addition, any other issues that I need to be aware of ?

Sounds like this should be part of the FAQ...

Thanks for any help.


Programming the memory seat? Place everything where you want it and then hold down the "set" button and then press and hold whichever number you would like it to be...(1 or 2)...until it beeps. Then you're done.


Not what you're looking for?

Register now, we have a huge community of enthusiasts to answer any questions you might have