1KhpWrx

LOL... Not many cowboys near my area

I am down for an OC show

PM me, I can help you out...

Man, I would have freaked out!!!

I have my 1992 Lexus SC300 for sale.

It is a full show car ! It has been featured in Import Tuner magazine. It has won first place trophys at HIN Hot Import Nights and other various car shows.

I have two SC300s right now and its just time for a change.

All the little flaws on the car will be addressed by me. If you come look at the car you will see what I mean. The new owner of the vehicle will basically be getting a perfect car.

Price = $14,500 or best offer. I am not hurting for money so your lowball offers will not be needed. Please email me with any questions.

I would like to trade it for something of equal or greater value (considering the value of aftermarket parts alone is well over $25,000 not including labor!).

Shipping can be arranged depending on buyer.

I am a very honest and trustworthy guy.

Exterior

- JIC Magic Body Kit

- Daytona Blue Metallic Paint w/ Extra Metal Flakes

Interior

- Fully Rewrapped Vinyl Interior

- Recaro SRD Seats Rewrapped

- GReddy 4-Point Harness

- GReddy Shift Knob

- Lexus IS300 Steering Wheel

- Apex'i Power FC Stand ALone ECU

- Apex'i 3 Bar Map Sensor

- Apex'i 60 MM Boost Guage

- Apex'i 60 MM Oil Temp Guage

- GReddy Profec B Spec II Boost Controller

- Blitz Turbo Timer

- Custom stereo, Upgraded sub in factory location, Precision amp, upgraded speakers

- Woodgrain dash has been painted to match exterior color

Wheels/Brakes

- 19x10" Blitz Technospeed Limited Edition Blitz Silver (Rear)

- 19x8.5" Blitz Technospeed Limited Edition Blitz Silver (Front)

Suspension

- Tein HA Coilovers

- TRD Strut Tower Brace

Engine/Exhaust

- Toyota Soarer Front Clip Bought for 1JZ-GTE Turbo engine swap Done Right!

- GReddy T78-33D Turbo Kit - polished

- GReddy 3.5" Downpipe

- GReddy Type R Wastegate

- GReddy 1.4mm Metal Head Gasket

- GReddy Braided Oil Feed and Return Lines

- GReddy Aluminum Radiator Piping - polished

- HKS Super Sequential Blow Off Valve

- HKS Hi-Power Exhausts

- 3.5" Custom Exhaust Piping

- ACT Street Clutch

- R154 Toyota Soarer 5 Speed Transmission

- XS Engineering GT Intercooler

- SARD 800cc Side Feed Injectors

- Walbro x 2 255 Lph Fuel Pump

- AN Steel Braided Fuel Lines

- Koyo Race radiator - polished

There is probably some things I left out...

I have this car sitting in my garage at the moment in Orange County and it can be shown at anytime. Please email me if you'd like to come see the car.

There is roughly 36,000 miles on the engine swap.

SERIOUS BUYERS / TRADERS ONLY!!!

I would consider TRADING FOR - Supra Corvette Evo Sti S2000 RX7 G35 350Z Skyline R32 R33 SC430 S15 SRT8 M3 E36 E46 M5 E39 Cobra Mustang Saleen Camaro Audi Porsche 911 Carrera AMG Viper GS300 GS400 GS430 LS430 Grand National Muscle cars Race cars track cars Turbo cars Nice Turbo Diesel trucks ... Basically something nice. I like tuned cars, luxury cars, and immaculate stock cars. Email me and Tell me what you have, I wont be rude if I dont like the car your offering...

PLEASE EMAIL ME WITH ANY QUESTIONS.

Thanks for your time looking at my add!

Let me know what you people think....

Anyone who can refer me a buyer will get a nice kickback. $$$$

I have had 20x8.5s on my SC300 with no issues at all.

The only difference I noticed was that there was alot less tire so the ride was bumpier.

They clear everything well just they rub a little during U-Turns.

I enjoy very much.

Those wheels are amazing!

You will not have to do any suspension work as long as you are not switching to a 20 inch+ size wheel or a wheel that is 9.5+ inches wide.

If you want to buy factory lexus wheels they will fit and look great!!!

If you dont drive over 85 miles per hour it shouldnt matter what speed rating your tires have.

Just expect that if you buy a knock-off brand tire that the miles you will get from them will be reduced by about a third.

It should fit with no problems.

I have 2 sc300s and probably 5 sets of wheels.

I have 18x9.5 on one of them and 19x10 on the other.

The only rubbing I have encountered was with the 20x8.5s that I have which was a 245/35ZR20... It only rubbed while making U-Turns.

I hope this helps.

The best thing I could suggest is to find a reliable mechanic that will charge you roughly $45-$55 an hour for labor.

I have seen mechanics break or bend items on customers cars when brought in for diagnosis to inflate the repair costs.

Also try to stay at the shop when they are working on the car so when the computer says 5.5 hours labor for a minor jobs that takes less than an hour to do they might be able to charge for two hours...

Just a thought.

I have two SC300s and they both have a similar rip in the factory carpet to the left side of the drivers seat. Rips goes from the floor to the door sill, Straight up. I was wondering what this was from? I purchased both of my cars used and they both had it from the point of me owning it.

If anyone has an answer I am just curious.

Thanks.

It should fit as long as the blot pattern is 5x114

Do you have any pictures of this exhaust?

Any fabrication shop can make you a nice custom license plate mount without drilling into your bumper.

What smooth1 said should have helped alot.

some guy at this site "www.uza70.com" has everything you need to make your 1UZ a manual monster.

If you remove the cat you will most likely not pass an emissions test. With only removing the resonators you will probably pass but there will be a drone in your vehicle while driving on the freeway.

I have a 97 SC300 Black exterior with Black and Tan two ton interior for my daily driver.

I have a 92 SC300 Candy Metallic Daytona Blue Show car with 1JZGTE and everything upgraded for my sunday cruiser. Soon for sale.

JIC magic body kit fits very well and look amazing!