yes there is one way, by disengaging the VSC, and this is how you can do it :
the car should be in off mode, and you start your engine normaly , now, within the first 5 seconds from starting the engine only, if you are delayed, or you couldnt complete the steps quickly u will need to shut down the engine and start all over :
1- when the engine is just started and in parking
2- press the parking breakes,
3- push the normal breakkes completly and relase it ( while the parking brake is applyed), repeat 2 times
4- relase the parking breakes,
5- press the normal breakes and keep press ing it to the max by your foot,
6- press the parking break to the max and then relase it, ( while the normal n=breakes applied ) repate two times
7- relase the normal breakes and press the parking brakes again
8- preas the normal brakes fuully and relase it twoice while the parking brakes are still pressed
the VSC light will come on and the traction contrlo will be off untill you shut down the engin, when you do, all these step will be reset
WARNING : while the VSC light on and it is disabled, all the stability controls will be off and the car will handle strangly from the normal driving that you are used to , and might cause accedint if you didnt pay attention, the car will show huge power and can lose control of it easily, don not use this mode a lot as you may forget that it is disabeld and relay on the stabilty control in some moments forgetting they are disabled.
