theycallmemain

You are probably looking at the wrong end of the bottom rad hose. The thermostat is at the other end of the bottom hose, where it connects to the water pump. You'll need to remove the front passenger side wheel to get access to it. I may be wrong on this, but I think the thermostat location was moved to the top of the engine starting with the 94 aluminum block engine. On the iron block engines (93 and earlier), the thermostat was located at the lower left side of the engine. This location did require the wheel removal to get to it. You could be right. sorry maybe im just dumb but i cant find it on the top and there are only two hoses on the rad one that you put rad fluid in on the top of the motor and one on the bottom i do believe it goes to the head

so i have a 95 es 300 the rad cracked so i put a new one in but i put a bigger one in 10mm bigger then stock it ran fine and then it started overheating really bad just sitting there at an idle and if i drove around for more then 10 min it starts overheating. im gonna go and check the powersteering fluid (thats crazy) but im gonna replace the thermostat too but i cant find it i was told its at the end of the bottom rad hose. but thats not where its at any other info would really help thank you very much. i did a fllush myself to the rad. but ima take my car to a shop so they can do it the way it has to be done. thanks for your advise.

so i have the strut pulled off to replace the strut bearing and im going to put it back together but the spring compressur is in the way no matter where i move or put it im not sure if there are different size compressurs or what i know this really doesnt explain much but any help or knowledge would help thanks very much