Iv tried TIS to get more info but as they only accept billing addresses from the States and I'm in New Zealand
Does anyone have an alternative
I'm going to pull the wheel height sensors of and see if they are faulty,got to start somewhere.
Help
My 90 ls400 suspesion pumps up realy high and hard but not all the time .Sometimes its the front and sometimes the rear and sometimes both.Have pulled the batterie played with the on off switch in the boot and after a while it will reset to normal. Then after a few days the pump will operate with the key out and pump up one end or the other or both.Makes it hard to drive and also get a power of gref from my mates driving around with the suspesion all jacked up.
Anyone know if moving the sensors would work
Would like to drop the rear 50mm or 2 inch and the front 40mm or 1 3/4 inch
Would this blow the standard shocks
Where do I get an after market cotroler or
Is there any way to reprogram the factory controler
Done a lot of searches and come up empty but man have I learnt a lot doing all that reading
Found one http://www.l-tunedparts.com/product/?id=1633 how many gold bars have I got not that many
Hi all
Have a 90 ls400 with air suspension
How can I lower the standard ride height and in doing so have the high setting as standard.
Is it a matter of moving the sensors or can it be done easyer than that
Thanks for any help