the batter is inside the ECU system...
Is your board a one piece board or two pieces?
Mine's a one piece. http://lexus-toyota-nav-trouble.blogspot.c...on-trouble.html (the picture was blown up from a smaller image so it's not very clear but it shows everything inside the ECU. The ribbon cable is connected to the drive and the drive is to the bottom of the picture)
I did the following.
Unplugged the ECU from the car.
Took off the cover.
Unplugged the ribbon cable for a few minutes.
Plugged the ribbon cable back in.
Cover back on.
Reconnected the unit in the car.
Turned to key to Accessory.
Error still appeared.
The DVD was in the drive for the entire process.
Did you power it back up between unplugging it and plugging it back in or did you simply unplug the cable, plug it back in and power up the system? Was the disk in the drive during the entire process?
edit:
I also tried the same thing, but this time I plugged it in with the drive disconnected.
then unplugged it and put everything back together but still nothing.
My post now also shows both boards Gen 3 (one piece) and an unknown Gen (two pieces)
http://lexus-toyota-nav-trouble.blogspot.c...on-trouble.html