phillipscott28@hotmail.com

ok, i can help you baby. you have approximately 5 days left until christmas. I'm a customer installer with my own shop. you can email me phillipscott28@hotmail.com and we can exchange numbers and i can walk you through it over the phone or i can jus tell you like this. what you are trying to do is very difficult and time consuming and you have to have a ton of skill beyond jus hooking up car stereos. you have to use that amp kit that you bought otherwise you will burn something up. if your factory speakers dont sound too bad take the after market ones back an jus use the factory ones it will save you a little change. finding your speakers. once you unplug the harnesses from the amp (under the seat) you should have two harnesses one harness is for power, ground, antenna, etc. the other harness is your speakers to find speakers take a AA battery tape a seperate wire on each end of it an have the two ends exposed. when you find the - and + of a speaker it will pop. test this theory with a speaker around the house. once you find the speakers you have to clip the wires and run them to your head unit. you can get a harness off www.installer.com/wires/index.html. HAVE A TON OF FUN!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1