gabep

King Obama will make Lenin look like an amateur when all is said and done.

My name is not Bongo and I can remove the covers with no problem. It was a legitamite question without asking for a sarcastic reply. Grow up!! I see no aerodynamic value to a panel behind the grill. Just for your info I have been working on and rebuilding cars since 1954.

I was looking at all the plastic panels under the car and the hood and it occurred to me these are just crap panels to discourage people from working on the vehicle. Any thoughts?

I have a 94 Camry with the same problem. Found 2 broken wires in the flex loom that connects the trunk lid circuitry.

Probably the warning for a tail light or brake light malfunction.

This site will give you the Mitchell maintenace and repaiir 1983 t0 2007. You will have to join and download and comply with the share and seed requirements. Just go to the site, join and then search for Mitchells repair. Hope this helps some members. Lexus is #10. Sorry I will not do a turotorial on this. You will have to read the readme files

http://www.ilovetorrents.com/

Don't know if this worked. I loaded a png file.

Had the same thing with a key purchased on ebay. Had to send it back. The key has to be programmed by the dealer in the ES330.

If you do torrents there is a site I believe you can join and download all the Mitchell repair manuals from 1983 to 2007.

It is ilovetorrents.com. Join and do a search for mitchell repair. Be sure to read the instructions as is is a little complicated.

I haven't had time to review them so if you do give us some feedback.

Don't miss the little hammer icon at the bottom for the tools menu.

Should have been this link.

http://www.lexustsb.com/

Here is one of the best tools I have run across.

http://www.softpedia.com/get/System/System...ial-a-fix.shtml

Here is a little bat file I wrote to fix the update problem

Copy the following to Notepad:

regsvr32 /s wuapi.dll

regsvr32 /s wuaueng1.dll

regsvr32 /s wuaueng.dll

regsvr32 /s wucltui.dll

regsvr32 /s wups2.dll

regsvr32 /s wups.dll

regsvr32 /s wuweb.dll

Then save it as "update fix.bat" then run the .bat file and reboot. Just double click each file as it comes up.

Try Window update again and it should download and install OK after this.

3rd one down, Michealstevens, is one of the better explanations.

http://www.google.com/search?hl=en&q=s...mp;aq=f&oq=

Ypu may also find a fix here.

http://www.kellys-korner-xp.com/xp_tweaks.htm

If you use the Dell repair disk it will restore the machine to the configuration as to when it came out of the box. All data will be lost. I have had excellent results recovering data with SPINRITE from gibson research. google it. I suggest, if possibe, assuming the machine is out of warrenty, removing the hard drive and slave it to another computer and recover the data to another hard drive or dvd's before going any further. Then you can do a system reinstall and reinstall all your programs later.

Try a system repair here. You can google "system repair Dell XP" for more

http://www.geekstogo.com/forum/How-to-repa...ws-XP-t138.html

Aviation has been using nitrogen for decades due to the non-corrosive nature. Air has water in it.

google link on freeze plugs.

http://www.google.com/search?hl=en&q=e...ine+freeze+plug

Which dealer? I am in San Diego also.

Just had a ES330 done at a Toyota dealer in San Diego. $230 with the brake flush. I did the cabin filter myself. $15 from Rockauto.com.

Usually valve stem seals.

I do have plenty of experience, but with a painted garage floor, I am wary of doing any more brake fluid flushes. Time is another issue for me now, as I'd rather not spend an afternoon doing it, myself.

But you are correct in that is not difficult as long as you bleed in the correct sequence.

Dave

I see you are in San Diego. Just had the 30,000 check done on a ES 330 at Bob Baker Toyota on Federal Ave. $230 including a discount coupon for the brake bleed that they had at the shop.

Ver. 6.1 and newer 7.1 are available from numereous places. Dealer, Ebay, etc. Be aware you will lose access to the maint. menu and the in motion programming hack with the updates.

It's a Mig SU 35. Awesome machine. Google it.