Jump to content


DRAGUNOV

Regular Member
  • Posts

    18
  • Joined

  • Last visited

Everything posted by DRAGUNOV

  1. my auto lights do not work when it is dark i have to turn on the lights manualy. any ideas? thanks
  2. 'DRAGUNOV', The tach Cluster (light) is not working, or the RPM needle does not move when driving the car? most of the lights work but the tach needle does not move.
  3. its my tach that is not working. my odometer is fine with 93k on the clock. the junk yard said the that the cluster they have was pulled at 140 k and i do not want to put that in my car without correcting the milage. thanks tyler
  4. i have am buying a new gauge cluster. how do i correct the odometer reading? is there a place i can send the new cluster? thanks tyler
  5. ok so i removed the cluster to change some light bulbs and when i put everything back together my air bag light is on. i extracted code 22 which is warning light malfunction. has any one ran in to this problem? i have searched and found nothing. i tryed resetting the light but it wont go out any insight would be great thanks
  6. DRAGONUV, If you ever need an amp, I'll have one for you. :D how much?
  7. i realy hope it continues to work as well. as i do not want to go aftermarket. aftermarkes just gets your window broken and your deck stolen
  8. well i reassembled everything and viola it all works great feel free to archive as a wright up
  9. ok i have disassembled the amp and there is a fair amount of moisture. i blew it out with compresses air and have it sitting in front of a heater fan. i inspected the amp and all of its componits with a magnifying glass and nothing appears to look as if it fried electrically.
  10. well here's a quick update i removed the cd changer and the amp. there was quite a bit of water there and the amp was moist. i soaked up all the water then vacuumed it out. and i have a little heater in there drying anything else i couldn't reach. i am going to disassemble the amp, inspect it and dry it out. has anyone had any luck bringing an amp back to life? has anyone had good luck waterproofing the amp? drilling drain holes? feel free to chime in tyler
  11. well i checked the two connectors under the rear seat. blew them out with compressed air, then covered the terminals with dialectric grease. there didnt seem to me any water or corrosion there. it didnt fix my problem . still no volume. i am going to look for the amp and see what condition it is in. if tyhe amp goes will all the sound go out? where is the amp. i am searching
  12. well first i checked all the fuses in the drivers kick panal, then i checked all the ones in the in the engine bay. i played with the mute buttons on the side of the steering wheel with to avail. any other pointers would be great. if i cannot diagnose it soon i think i will go with an aftermarket stero. but i would realy like to keep the stock unit so i dont get my car broken into. and the stock unit sounds great when it is working properly
  13. Dont know what it could be, Sorry. Maybe try to take off your negative battery terminal and reset your ecu. Good Luck. ok i will give that a try thanks
  14. well i just bought this car a few days ago and it has been great untill tonight(i always have bad luck with used cars) anyways my streio works but theres no volume no sound to any of the spekers it just happened. i turbne on the car and it didnt work? any ideas would be helpful thanks tyler
  15. hi my name is tyler. i am the happy new owner of a burgandy sc 400 with 90 k on the ticker. i am going to take it to a garage where i can inspect it on a lift. does any one have any reccomendations or tips for things i should look for? thanks tyler
×
×
  • Create New...

Forums


News


Membership