HOTSANDRAIL

Thanks Omar! If you're interested in the '94 rims & tires you can email me at hotsandrail@hotmail.com I have no need for them. Does anyone know if the LS 430 rim will fit my '94 LS 400? Thanks!

Thanks Omar! If you're interested in the '94 rims & tires you can email me at hotsandrail@hotmail.com I have no need for them.

Hey Guys! I did a search and couldn't find anything. I'm about to purchase a set of 1999 LS 400 wheels and want to know if they will fit on my 1994 LS 400? Thanks in advance! :D Mike

You're right..strange however it makes since! I'll give that a try today. Again thanks for everyone's help and thanks for welcoming a new member. I'll keep you updated, meanwhile keep the ideas rolling in...

Hi Adam, Thanks for emailing the pics. These wheels are off of a 2001 Lexus IS300 and will not fit mine so I'll have to pass :cries: Good Luck! Mike

Check your email...I'm interested! What year did these come off of? Correct me if I'm wrong guys but the '90 - '94 LS has the same bolt pattern and the '95s and up are the same. LMK

Thanks for the info however I have the proper amount of coolant so that's not the problem. As I mentioned in my previous post the shut off valve in the engine compartment is new and working properly as well, the thermostat is new.. I'm thinking maybe the relay is bad?? Any other thoughts what else it could be before it goes to the shop? Thanks!

Does the blower increase speed as you raise the "target" setpoint? Thanks for your quick response! This may be a stupid question but...raise the "target" setpoint meaning adjusting the temp setting from 65 (cold) to 85 (hot) OR are you asking about the low/med/high blower settings? The blower motor works properly when using the low - high settings. When adjusting from cold to hot or vice-versa I can see and hear the valve opening and closing as it should. Could it be a relay or fuse keeping it from blowing out hot?

Hello Everyone! I've been hanging around here for a while and just joined up yesterday. I have a LX450 and my Wife has a LS400 I've really learned alot and have received some helpful advise from you guys and I'm needing it again today. First off I did do a search but still need your help! On the LS400 the heat stopped blowing out hot. I replaced the shut off valve on the firewall where the cable hooks up to and it is working properly. I also changed the thermostat and coolant and filled to the proper level however still no heat! At start up I can almost feel luke warm air but it turns to cool and stays cool even when driving. The blower is blowing as it should however I'm just not getting any hot air. The wind chill is 8 degrees this morning and my Wife Needs HEAT! Any ideas as to what I should do next? As always thanks for the help! Mike