LS400GUY

about $300 after alignment i would say, bought the RODS from lexus and installed them myself. of course it needs a alignment (only slightly from what i can tell driving it)

alot harder to install than i thought, :( but it fixed the problem!

I typically buy only lexus parts, but since these seem to wear out fast, I found some ADUS Polyurethane bushings. I think i will get a set of these... Thanks all for your help

Do i need to replace the whole rod? Or just the bushing?

So this bushing is probably what is causing my problem?

I have a 2000 Lexus LS400... Lately it has been shaking at high speeds (80MPH) and its not the tires or balance. Also at low speeds if I turn my steering wheel all the way to the left or right it clunks some, also if i press the brake at low speeds it makes a clunking noise. Then yesterday I had to brake pretty hard at 70MPH, and it made a REALLY loud clunking noise and my car pulled to the right. So I took my right wheel off, looked at the brakes, looked at the bushings, and I looked at the strut rod bushing. It looked BAD to me, but what do i know, so I took a picture of it, what do you guys think? Does it need replacing? Also what else could be causing these problems if its not this bushing? Thanks