Jump to content


jakino3388

Regular Member
  • Posts

    74
  • Joined

  • Last visited

Posts posted by jakino3388

  1. So I buy a 95 SC4 with 89k on it, for a good price.  AFTER all of the paperwork is signed, I'm picking the car up from detailing, and the previous owner (who was also the finance manager at the dealership) tells me that the power steering pump is leaking, and he'll get it fixed for free (At Nissan).  They fix it, and it starts leaking again.  I call the dealership, and they advise me that I should just take it to Lexus, which will be covered by my extended warranty that I purchased.  Ha! First off, the warranty company tells Lexus my warranty is invalid, since the car is over 8 years old.  After some sweet talking, they tell me they will repair it, BUT they will only pay for the p/s pump.  After I read their own contract to them, they realize the reservoir is covered too, which apparently was bad also, along with a $500 hose.  Lexus wanted 2500 to replace the pump, reservoir, and a couple of hoses, but the warranty company would only cover 600 bucks of that...what a load of bs.  Long story short, don't ever buy a QualityGuard plus extended warranty!  If I wasn't leaving for Afghanistan soon, I would be kicking some !Removed! at the dealership where I bought the car (Courtesy Nissan Tampa)!

    Did this on my 95 SC400 before it was wrecked. Aftermarket cost was $130 after core and $125 for labor. If you do your oil changes someplace that doesn't know Lexus make sure they top it off with the correct fluid. What I found is that many times they put in power steering fluid instead of ATF which causes it to leak due to different viscocity.

    use only the factory parts in the long run it will be better. and take everything apart slowly and if you have to draw pics. to remind your self where everything goes, its not that hard take you time and look at everything it should not take you more then one day, takes me one hours at the most to change out the pump and hoses. remember the factory part will be better in the long run. I stand by that.

    and use aft with dextron.

    Kino

  2. you got to be kidding right? well aways it takes about 2hrs total for soemone who never done it before and about 3 difrent size sockets. if you never done it before on any car i dont recomend you start to try on a lexus... Dam DudE!

    Not kidding at all. I've done Mazda 929 multiple time, BMW 740IL and several Passata, and they are all different. Looking for some guidance on RX300 - mainly which bolts to remove, what to torque them to, and any other idisyncrasies I should be aware of before I start.

    Just jack up the car and look at it its really easy. half hour at the most. just to change out. but its better if you resurface the rotors first.

  3. Who offers the front controll arm bushings for the sc400? I dont want to pay for the whole assembly. I was hopeing to get some bushings or ball joint to repair them. Any info of you who have changed them holler at me

    Tommy K

    Fresno CA

    http://www.tmengineering.net

    but your best bet is to change out the whole control arm. because if you only change out the bushings then the ball joints might go out after, and you don't want to that to happen right.

  4. are you still having probs with the drivers side seat. let me know because I have a drivers side seat adn the memory switch for sale if you want it let me know. also the door panel is easy to open. o yea have cup holders for sale also. the one in the dash and the one in the center consel. and a a/c controler. and rendom parts for the sc's

    Let me know

    Jakino

  5. I still got the wood for the door. sold the vents let me know if you want it and how much you are willing to spend. no low blows ok. these are hard to find and I have all the drivers side door adn one the longer price for the passanger side door. Also the one above the air bag. let me know. also the kits fo for about 200. try checking ebay.

    Jakino

    post-3-1087127960.jpg

  6. Various Gray Interior Parts of a 1993 SC 300/400

    All parts ready for shipping

    Shipping is additional

    All prices are negotiable

    Front Dash - SOLD

    Rear Dash - $30

    Left Rear Panels - $40

    Right Rear Panels - $40

    Set of Floor Mats - $50

    Headliner - $50

    Right Sunvisor - $20

    Passenger Window/Door Control - $40

    Automatic Shift Handle w/overdrive - $45

    Center Console w/ Arm Rest - $50

    Third Brake Light - $40

    Rear Seat Belts - $30

    Front Seat Belts - $30

    Sun Roof/Dome Light Control - $40

    Pillar Mounts (Right & Left) - $40

    Steering Column Cover -SOLD

    Fuel Pump Control - $50

    Air Box - $50

    Gear Selector Indicator - $30 (Fits SC300 or 400 with out trac. control and heated seats)

    Driver Side Scruff Plate - SOLD

    Passenger Side Scruff Plate - $SOLD

    Driver's Side Door Panel - sold

    Passenger Side Door Panel - sold

    Driver Window/Door/Mirror Controls - sold

    Rear View Mirror - sold

    Left Sunvisor - sold

    NOW ADDING ON

    WOOD GRAIN EXCEPT ONE ON THE PASS. DOOR FRONT- 200

    Glove Box-50

    Other parts are available. Post reply or PM if interested in any parts above or any parts not listed. I will let you know if they are available. Willing to accept any reasonable offers. Pictures available upon request.

    Thanks for looking!

    do you have a grey upper back seat(the part your back touches) for an sc for sale?

    Sorry dude I sold that a long time ago.

    Kino

×
×
  • Create New...

Forums


News


Membership