z89101

From the bottom of the wing after you remove the little bolts holding it onto the lid (behind underlid liner). However, B4 U do that, make sure you have power at the harness coupling (IIRC upper R rear fender/rear seat area?) that supports the tail of the LED. - Anyway, I had zero V being delivered so pulling MY LED was a waste of labor... You could also put 12v and Neg to the LED lead to confirm its OK and if so bridge it to the barke light + and NEG wires should tracing the harness issue be to much oif a pain.. IF LED is a no go with direct + and NEG 12v test, its fleabay time. Cheers Michael T

Oh boy, years go by and zero issues and then this weird event The drivers side mirror is loose on the post that it moves on. Ya know, like when you go into a car wash and the mirror housing moves toward the door and then you push it back forward to its default position after you dry off the car? Well, now it moves back and forth with ease. I gently raised the mirror body and saw the post it pivots on, so I think that a retaining screw of some kind has come loose, or??? Ya see, I have never had the mirror housing apart to know how the housing and post are retained together. Any ideas on how best to seperate the mirror body or fix this issue? __________________