DJ Automatic
-
Posts
6 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Articles
Videos
News & Articles
Posts posted by DJ Automatic
-
-
If any of you need help (step by step) I can guide you down the right road.
For 98 and up models only.
-
i live in virginia, and i whent to lexus last week and it was 77 dollars for a key. you have to have a drivers lic. and other proof and you get the key the never day......i also have a 93
I might be able to get you one cheaper, let me look into it,
send me a IM with your year and model I will respond with pricing.
-
Okay I did it yesterday and it sounds great.
Got me Multimedia system booming......
Thanks guys!
-
So tell me whats the process without breaking anything to remove the sub?
step by step if you can guide me.
I am ready got all the gear in today.
Thanks
It's 4 bolts, big deal! The only bad thing is that you have to remove the rear deck, BE CAREFUL!!!! 12 yr old plastic doesn't like to be disturbed!!!! -
so the only way to replace that 10" sub is to remove the back seat huh!
wow.....looks like I got a project on my hands!
I purchased a 10" Solo Baric
Impedance: 4 ohm
Power: 450 watts
Frequency Response: 24-100 Hz
Mounting Depth: 4 7/8"
Mounting Hole: 9 3/8"
Recommended Enclosure: .66 cu. ft
and this amp for it
2 x 300 Watts RMS at 4 Ohms
2 x 600 Watts Max at 4 Ohms
1 x 1200 Watts Max at 4 Ohms Bridged
2 x 500 Watts at 2 Ohms
Electronic Crossover Network
Bass Boost Circuit
Bridgeable at 4 Ohms
2 Ohms Stereo Stable
Tri-Mode Capable
Gold RCA Inputs
Line Outs For Left & Right Channels.
Power & Protection LED Indicators
Advanced Protection Circuitry
Soft Turn On/Off
Remote Control Bass Booster
Frequency Response: 15 Hz - 35 kHz
S/N ratio: 90dB
Dimensions: 11.5"W x 2.3"H x 15"L
So hopefully I will get some good sound out of it.....will see
Gs300 Sub Replacement
in 93 - 05 Lexus GS300 / GS400 / GS430
Posted
Pull the bottom part of your set up and outward on both sides,
remove the headrests, under the velcro flap theres a 10mm nut remove it
from both sides, then remove the seat belt bolts on the bottom where the bottom seat piece was removed, then remove the two 10mm bolts on the bottom holding the back panel seat in place, now remove the little screws from the shoulder straps seatbelts, ontop of the backseat rest. now remove the three black plastic push rivets with a flat head scewdriver (on the back panel). now pull the molding outward where the end of the window is it looks like this ---> ( pull that molding out just enough to remove the right side back piece against the left and right side,
those two pieces are holding the back panel in, so remove those pull a little hard,
then the back panel pulls out real easy. then remove sub and replace.
then follow the steps backwards to put back.