Jump to content


DJ Automatic

Regular Member
  • Posts

    6
  • Joined

  • Last visited

Everything posted by DJ Automatic

  1. Pull the bottom part of your set up and outward on both sides, remove the headrests, under the velcro flap theres a 10mm nut remove it from both sides, then remove the seat belt bolts on the bottom where the bottom seat piece was removed, then remove the two 10mm bolts on the bottom holding the back panel seat in place, now remove the little screws from the shoulder straps seatbelts, ontop of the backseat rest. now remove the three black plastic push rivets with a flat head scewdriver (on the back panel). now pull the molding outward where the end of the window is it looks like this ---> ( pull that molding out just enough to remove the right side back piece against the left and right side, those two pieces are holding the back panel in, so remove those pull a little hard, then the back panel pulls out real easy. then remove sub and replace. then follow the steps backwards to put back.
  2. If any of you need help (step by step) I can guide you down the right road. For 98 and up models only.
  3. I might be able to get you one cheaper, let me look into it, send me a IM with your year and model I will respond with pricing.
  4. Okay I did it yesterday and it sounds great. Got me Multimedia system booming...... Thanks guys!
  5. So tell me whats the process without breaking anything to remove the sub? step by step if you can guide me. I am ready got all the gear in today. Thanks
  6. so the only way to replace that 10" sub is to remove the back seat huh! wow.....looks like I got a project on my hands! I purchased a 10" Solo Baric Impedance: 4 ohm Power: 450 watts Frequency Response: 24-100 Hz Mounting Depth: 4 7/8" Mounting Hole: 9 3/8" Recommended Enclosure: .66 cu. ft and this amp for it 2 x 300 Watts RMS at 4 Ohms 2 x 600 Watts Max at 4 Ohms 1 x 1200 Watts Max at 4 Ohms Bridged 2 x 500 Watts at 2 Ohms Electronic Crossover Network Bass Boost Circuit Bridgeable at 4 Ohms 2 Ohms Stereo Stable Tri-Mode Capable Gold RCA Inputs Line Outs For Left & Right Channels. Power & Protection LED Indicators Advanced Protection Circuitry Soft Turn On/Off Remote Control Bass Booster Frequency Response: 15 Hz - 35 kHz S/N ratio: 90dB Dimensions: 11.5"W x 2.3"H x 15"L So hopefully I will get some good sound out of it.....will see
×
×
  • Create New...

Forums


News


Membership