Jump to content

fery

Regular Member
  • Posts

    21
  • Joined

  • Last visited

Posts posted by fery

  1. Hi All,

    My navigation stopped working after plugin a charger to the dead battery. I got "A program cannot be read. Please consult to a dealer." I found in web sites, that the firmware on my navigation unit is gone. Replaced my cd with couple of different cd's but no luck.

    Is any body know how or where I can find Firmware CD?

    RX400h

    Thanks

    Before poking around using the old "wet finger test", why not try calling your dealer and tell them what you just explained. Most dealers are pretty nice folks and might be able to at least give you a starting point.

    Paul

    Ok , I'll do that.

    Thanks

  2. Hi All,

    My navigation stopped working after plugin a charger to the dead battery. I got "A program cannot be read. Please consult to a dealer." I found in web sites, that the firmware on my navigation unit is gone. Replaced my cd with couple of different cd's but no luck.

    Is any body know how or where I can find Firmware CD?

    RX400h

    Thanks

    post-126579-0-72569400-1378179263_thumb.

  3. Ok, took apart the unit, checked all diodes and resistors on the board, seems all ok. So the surge voltage should have passed protection circuit and get to the processor.

    I'm going to take my friends navigation unit and put it in mine to see if it start working then I e sure problem is this unit. I wished I had the circuit diagram of the unit t diagnose it.

  4. Fuses are all ok,

    I did the diagnostic check and NAVI returned NRES, It did the same result in LAN Check as well.

    meaning: The device responds in diagnostic mode, but gives no DTC information.

    ACTION:

    1. Check power supply wire harness of the device.
    2. Check the AVC-LAN of the device.

    As per repair manual.

    I'm going to open up the navigation ECU and see what's going on there. My guess is the unit fried.

  5. Hi,

    The TPMS sign appeared couple of days agoon my 2007 RX400h. I checked tire pressures , all was 32, even spare tire. I triedto initialize but after 3 blink of TPMS warning, the checkingsystem showed in the cluster. The Main or 2nd set , non change thesituation.

    Any idea how I can clear this messagefrom my cluster?

    Thanks

  6. I know RX400h has around 1.3KWh of energy storage (battery) comparing to Volt (16KWh). The reason I asked is that, I have 85kmiles on my car and wonder if the batteries working fine or they need to be replaced? Comparing to Sash car with 31kmiles , I have same mileage, so Toyota is cleaver to keep the batteries OK till end of warranty I think.

    I hope to see other people's experience in this regards.

    Thanks

  7. I have 2007 RX400h. I burned couple of audio DVDs with nero. I used jukebox audio DVD, but I just got "No music" comment on screen!

    I burned Data DVD with MP3 files , It didn't read it as well. What options did you set on nero to burn the audio dvd?

    thanks

  8. I drove a BMW X5 with this feature, it helps a lot while parking. It shows where you go as turn the steering.

    I had a friend from UK and he mentioned their Lexus has this feature. It seems the North American version hasn't it. I found the first picture from Lexus service manual which shows the lines in rear camera screen.

    May be an update could do that. I want to ask everybody to bugging Lexus dealer to find this upgrade.

×
×
  • Create New...

Forums


News


Membership