David Culberson Posted January 25, 2014 Share Posted January 25, 2014 This is the old pair of cylinder heads off my GS430. So they're from a 2001 3uz-fe engine with around 225,000 miles. They have three bent valves. You should plan on a full reman with magnaflux, valve job, etc. It includes all four camshafts which had no problems with them. All the cam bearing caps and screws are here. The car ran, just poorly with the three stuck (bent) exhaust valves.Assume they're good as cores, probably rebuildable. I just want to see if anyone can use them, keep them out of the scrap heap. How about $100 plus shipping for the whole shebang?These aren't going to stick around long. If you have any interest let me know right away. I'll give it a week or so before they get sold as scrap. Quote Link to comment Share on other sites More sharing options...
David Culberson Posted March 1, 2014 Author Share Posted March 1, 2014 Gone to scrap. I kept the cam position sensors and vvti actuator with cam gear so if anyone needs either of those drop me a line. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.