Jump to content


Recommended Posts

Posted

The AC started pumping out hot air a few weeks ago. Here are the facts about my system:

1. The clutch works - no funny noises, everything smooth

2. I put in leak sealant and refrigerant combo with leak detecting color into the low pressure side - no leaks. Pressure is 50 lbs.

3. I went to AutoZone and had them connect the diagnostic tool - NO ERROR CODES anywhere

4. I borrowed the gauge setup from AutoZone to test the high pressure side - 125 lbs. - and when I removed the fitting there was a puff of released gas (like when you remove the nozzle from your car tire's stem after filling it with air) and there was a green color to the mist, so I suspect that was from the leak detection color from the sealant/refrigerant. I don't know if the pressure should be higher than this, but there was pressure.

Bottom line: the parts of the system around the engine compartment seem to be fine, and there are no error codes showing on the diagnostic tool.

Any ideas???


Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...

Forums


News


Membership


  • Unread Content
  • Members Gallery