Adam8g Posted March 20, 2010 Share Posted March 20, 2010 Hey there. A part on my '01 GS 300 (heat shield?) broke off and I need to get a new one. It's a metal plate that is attached to the underside of the intake runner right over the exhaust manifold. (Well, I figure Lexus put it there for a reason, and that reason is to keep heat off the intake runner and I assume that without it my car will burst into flames as I cross the California desert in mid-August.) The problem is - the dealer doesn't sell the part alone. It comes as part of the Intake Air Connector Sub-Assembly. The quote for that is BIG$ and I'm not about to spend tons of money for a piece of sheet metal. I know - it looks like it would be easy enough to remove the broken tabs and somehow spot weld them back on, or to fabricate new ones, etc. But I don't have access to any welding stuff, have never done any, and don't know how to go about it. I have some simple hand tools and thats about it. So, if any of you have modified your car with an after market intake, or know of anyone who has - let me know. Thanks much for your help. Quote Link to comment Share on other sites More sharing options...
tuanville Posted March 21, 2010 Share Posted March 21, 2010 Hey there.A part on my '01 GS 300 (heat shield?) broke off and I need to get a new one. It's a metal plate that is attached to the underside of the intake runner right over the exhaust manifold. (Well, I figure Lexus put it there for a reason, and that reason is to keep heat off the intake runner and I assume that without it my car will burst into flames as I cross the California desert in mid-August.) The problem is - the dealer doesn't sell the part alone. It comes as part of the Intake Air Connector Sub-Assembly. The quote for that is BIG$ and I'm not about to spend tons of money for a piece of sheet metal. I know - it looks like it would be easy enough to remove the broken tabs and somehow spot weld them back on, or to fabricate new ones, etc. But I don't have access to any welding stuff, have never done any, and don't know how to go about it. I have some simple hand tools and thats about it. So, if any of you have modified your car with an after market intake, or know of anyone who has - let me know. Thanks much for your help. Don't even worry, your car would be fine without that heat shield. If you want that part alone, and want to spend less money, i suggest you fabricate your own heat shield. It's not that hard to fabricate heat shield that little. Just go to home depot and buy yourself a sheet of sheet metal for about 6 dollars and cut it to the appropriate size, spray it black, drill some holes and you're done. You WILL smell some paint smell from the paint for about a week, but it's normal. OR! Stick some Heat resistant pads under that area. (if you're a lazy S.O.B who don't care how is engine looks.) Quote Link to comment Share on other sites More sharing options...
Doniz Posted March 21, 2010 Share Posted March 21, 2010 are there wrecking yards around your area. there are some who would even pull the part out for you and it wont cost as much as the dealer. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.