Tanabe Sustec Front Under Brace 06-on Lexus Is250 Is350

[sang1975]

Hey every one , do we need this for our car . http://cgi.ebay.com/ebaymotors/TANABE-SUST...0232512121&

Here one more http://cgi.ebay.com/ebaymotors/TANABE-Sust...0220732112& .

[Gaugster]

Hey every one , do we need this for our car . http://cgi.ebay.com/ebaymotors/TANABE-SUST...0232512121&

Here one more http://cgi.ebay.com/ebaymotors/TANABE-Sust...0220732112& .

Well it is hard to know everyone’s definition of 'need' is. In general the chassis/body of the 2nd Gen IS it stiff enough for all but the most critical of applications. So I would say no, nobody really needs it but if you race your car on a road course and have many other suspension modifications then it may be of benefit.

It is really personal preference. Some people just like this kind of stuff cause is look cool. Each to there own though. For drag racing, its just dead weight. I very very highly doubt that any brace of this type would cure all the rattles and noise that occur in the interior of the vehcile but I could be wrong. Frame connector on some other vehicles have done wonders but that was because the uni-body frames had a lot of flex.

Tanabe is a popular company so I would expect that brace to be a quality part.

Regards,