TennesseeLexus Posted March 22, 2007 Share Posted March 22, 2007 I realize to alot of you out in LexusLand this color on a car is boring. I happen to like it but when I was looking at '03 LS430s I would pretty much take any color but black. Now I stole my present CPO LS430 (under $35k) and it happened to be white soooooooooooooooooo It doesn't seem to show scratches or swirls and that is my delimma; how do you evaluate the paint on a white car? The car has been garaged and still is being garaged. Quote Link to comment Share on other sites More sharing options...
TOGWT Posted March 22, 2007 Share Posted March 22, 2007 Inspection Lighting-to inspect the paint finish for surface marring - Sunlight, Xenon, 500W halogen, and high pressure sodium-vapour (parking lot lights) Brinkmann - most LED’s merely glow, but Rebel's highly efficient, finely focused lens casts a 40-ft. beam of far-reaching light. Fish-eye-shaped lens focuses the light from the single white LED bulb into a bright, consistent beam; no dark spot in the beam's centre, the LED bulb is nearly indestructible and draws very little power, greatly extending battery life; runs on two AA batteries, included, a tough ABS plastic is armoured with thick, no-slip rubber grips Push-button on/off switch inset in the back cap Product specific - Brnkmann, REI - http://www.rei.com/product/47576705.htm Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.