Update: Es300 Clutch Pedal That Went To The Floorboard

[Capk]

I promised I would post an update on my problem. With 103k miles the clutch pedal on my 1992 ES300 would intermittently remain on the floorboard and would have to be"flipped" back into position with my toe! This was happening more frequently and made depressing the clutch pedal/shifting an adventure. Some suggestions here were to make sure the slave cylinder to clutch master cylinder hose was not collapsed internally or repair/replace the units. The dealer could not replicate the condition, but did say he noticed the pedal "got stuck under the floormat once". In the end, I had the slave cylinder and clutch master cylinder units replaced. Now everything is working fine. Can't complain -since the original units lasted 14 years!