Jump to content

92 Es Turn Signal Replacement


Recommended Posts


Remove the black plastic panel located in front of the radiator. It is held in place with a number of plastic clips. You will have to get a screwdriver under the panel and push up on the clips. Be very careful. The clips break easily.

After the panel is removed, you can see the bolts which hold the light assembly in place. There are three of them, and I believe they are 10 mm. Remove these, and you can pull the light assembly out. The turn signal bulbholder is located at the outside bottom of the headlight assembly. Turn the bulbholder counter-clockwise to remove it. Remove old bulb by pressing down and turning counter-clockwise. Install new bulb in the holder and put in place by turning it clockwise. Reinstall bulbholder in light assembly. Push light assembly back in place, reinstall bolts, and reinstall plastic panel.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Forums


News


Membership


  • Unread Content
  • Members Gallery