Justbizness45 Posted September 1 Share Posted September 1 Replaced plugs and coil packs due to #2 plug misfire code on CEL light coming on. Test drove fine. Next day it wouldn’t start. Been troubleshooting and I’ve verified no security light. Removed a couple plugs one at a time and verified good spark. Validated fuel up the Fuel Injectors. No OBD codes. So I’m left with air flow, ECU or the P1351 code I didn’t address from bank 1. Where is the ECU located on this vehicle so I can remove and inspect? Any suggestions on trouble shooting air flow (air filter is new)? Could the 1351 code prevent starting? Thanks for any suggestions/help. I’ve run out of ideas. Quote Link to comment Share on other sites More sharing options...
JerseyDan Posted September 2 Share Posted September 2 1 hour ago, Justbizness45 said: Replaced plugs and coil packs due to #2 plug misfire code on CEL light coming on. Test drove fine. Next day it wouldn’t start. Been troubleshooting and I’ve verified no security light. Removed a couple plugs one at a time and verified good spark. Validated fuel up the Fuel Injectors. No OBD codes. So I’m left with air flow, ECU or the P1351 code I didn’t address from bank 1. Where is the ECU located on this vehicle so I can remove and inspect? Any suggestions on trouble shooting air flow (air filter is new)? Could the 1351 code prevent starting? Thanks for any suggestions/help. I’ve run out of ideas. Looks like p1351 is camshaft position sensor. I do believe the car will not start with that code. Looking like it's camshaft position sensor? Any chance you had it unplugged and didn't plug back in ? Quote Link to comment Share on other sites More sharing options...
Justbizness45 Posted September 2 Author Share Posted September 2 1 hour ago, JerseyDan said: Looks like p1351 is camshaft position sensor. I do believe the car will not start with that code. Looking like it's camshaft position sensor? Any chance you had it unplugged and didn't plug back in ? No, I don’t know where it is. Thanks, I’ll look it up. Quote Link to comment Share on other sites More sharing options...
Justbizness45 Posted September 2 Author Share Posted September 2 Found it, I’ll pick up a new bank one sensor and install tomorrow!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.