bucwhokey

Lexus_SC_300_400_Factory_Workshop_Manual__WhereEverybodyKnow.pdf - 79.57MB

i know it works get em while u can

ok try this i just reupload it. Let me know if it doesn't work.

98 and up Gs300 service manual. http://rapidshare.com/files/15091425...anual.pdf.html

I want to get a remote starter for my 98 gs but cant find a good installer around here

change your starter first, its only 150 or so from autozone with the old core.

where do you buy replacement interior at?

now where did I put that can of wd-40?

i have new pads on all for sides. I was bleeding the brakes to day and took it for a ride and it felt a little better but still kinda spongy. It it normal to hear the buzzing sound when i step on the brakes. Sounds like its coming from the place where you put your brake fluid in.

Your temp senor might be on its way out. If your cooling fan still comes on and no coolant leaks then you should be fine.

OK try this hold down the set button and then push and hold down one of the number button and you should here a beep. If it doesn't beep then its not set.

Ok my brakes are acting strange and I don't know what's wrong with it. When i step on the brakes, the pedal would go all the way to floor before i get a good solid stop. But if i pump the pedal once and then step on the brakes, it would feel nice and solid like a good brake pedal should feel. I have to fix this because its very dangerous. I think i need new pads.

**Moved this to the GS forum.

Smooth 1

I do my own work because I can only trust myself with my cars

on old cars you sometimes have readjust your valve spring thingy forgot what it's called. You just take the valve cover off and adjust it. But you need a special tool to adjust it.

My car does the same thing I have to turn the key to left and then to the right to the ON and Start position. If i just put the key in and try to start it, it will just make a click noise and won't start.

www.easterncatalytic.com you might have to call them for pricing. But they are alot less than oem

or leave bumper on and clean area to be repaired and use epoxy and give it a day to dry and then use bondo, then sand, primer and paint.

no dont remove the A nut just hit the brake disc with a rubber mallet. Its a snug fit. Hole B is a screw with a 10mm thread i think but not really sure

i think i tried it when i was warnming up my car. I guess the memory set has brain damage or something.

just got it done today and i must say they did a pretty good good. charged me 20 bux. Now i just hope it holds up untill the new manifold comes in.

so, the cat is stainless steel not aluminum?

i have a gs300 and mine presets doesn't work also.

If use a exhaust manifold without the cats will it give me a check engine light.

what are my choices. The car runs perfect except for the loud exhaust leak from the cat. Can i just weld the cat so it doesn't leak? I check the prices on them and its crazy high. the cheapest is 450 for aftermarket. There's a used one at the junkyard but they wont sell it to me because the exhaust manifold and the Cat is one piece. Does anyone have a used one to sell me?