10) With the panel off, you can now see the oil filter (orange) and a nice gift from the Lexus engineers: an oil catch (green). Loosen the filter, and residual oil will drip out. The oil catch will guide the dripping oil out the oilpan/drainplug panel so position your oil catch below the catch.
11) On the new filter, dab a layer of fresh oil on the O-ring (the rubber ring around the outer lip of the open end of the filter). Align the threads of the new filter and spin it by hand onto the engine where the old filter was. When it makes contact, tighten by hand another 3/4 turn. Don't over tighten.
12) Wipe up oil drips. For me, even though the catch was there, some oil still dripped all over the exhaust pipe and panels. Wipe this up.
13) Fill the engine with 5w-30 oil, 5 qts. A funnel is helpful here.
14) Replace oil cap.
15) Replace both plastic panels.
16) Shut hood and drive around the block. Park the car on level ground and wait 15 minutes. Check for leaks and oil level.
Diy Rx330 Oil And Filter Change
in Workshop Tutorials - Lexus How To Guides
Posted
:D