m3b

I would certainly make sure you have enough freon in the system. Once you have checked that (I think it should be 1.55 lbs), look to see if yourBLENDOR SERVO is stuck open which allows too much out door air into the system and makes it difficult for the coil to cool all the air to the proper temp.

You can also check to make sure you condensor fan is working properly and creating enough air flow over the condensor.

Tjmc11- The levels are good on refrigerant. Can you tell me how to find the BLENDOR SERVO? I did replace one servo about a year ago. Thanks

My mechanic couldn't find the accumulator dryer. I see it is on the side of the condensor. Do you have to remove the condensor to replace it? My ac with a new compressor is not running cold enough (50 degrees). Any advice?

You can't replace it because it is an integral part of the condenser. You can replace dessicant bag but you shouldn't have to unless your system was open for an extended period. Did your mechanic quickly and carefully plug the refrigerant lines while he was installing the new compressor?

I got the dryer as part of the kit, that is the dessicant bag. Do you know how to replace it? The compressor warranty says it is covered if you replace the dryer.

My mechanic couldn't find the accumulator dryer. I see it is on the side of the condensor. Do you have to remove the condensor to replace it? My ac with a new compressor is not running cold enough (50 degrees). Any advice?