spetsnaz56

twist the housing counter-clockwise

pull it out, change the bulb

stick it in stick it in stick it in

i used these 921-x9 from superbrightleds.com

What color bulbs did you use. White or blue?

twist the housing counter-clockwise

pull it out, change the bulb

stick it in stick it in stick it in

i used these 921-x9 from superbrightleds.com

I was thinking about gettign these but there is a meessage saying this on there "Warning: do not use in headlamp housings - heat will cause LED failure and VOID WARRANTY ! "

First thing you want to do is lie on the ground with your head behind the left rear wheel and using a light, look at the linkage. It's easy to see and you don't even have to jack the car up to see it. If the linkage is "L" shaped, then that's your problem. If it's almost straight, then it most likely isn't your problem.

The pics are gone. I found the only one that I could and it's pretty much self explanatory. Maybe you could take some pics while you're checking. :)

I tried today to adjust the linkage. It was at a 45 degree angle, which is the center mark on it. I put it down as far as I could as recommended on here. The farthest it would go down to was an L shape 90 degree angle. I have no idea how it could possibly go down any farther to look straight. Any ideas? I'm sure I was adjusting the right thing. It was a star shaped 10mm nut. Thanks for any help.

I have the same issue with the headlights. The pictures on here don't work anymore. I checked the other forum and those pictures are not working either. Can someone help me out?