Jump to content


chris177

Regular Member
  • Posts

    7
  • Joined

  • Last visited

Posts posted by chris177

  1. hey guys, im new to here and hope to be a participating member from here on out. I just purchased a 99 es300 with 150k on it, it has about 35k on a new motor replaced by lexus on this so called sludge issue.... when i bought it it had a p0303 stored in it and replaced the plugs... it did nothing then replaced the 3 coil, did nothing, i work at a shop so we ran 5 cans of toyota efi clean through the engine to try to unclog an injector... did not fix it. ended up replacing the 3 injector which fixed the stumble.. then checked compression on all 6 cyl, had 220 on all 6. ran it for a day and set codes for both afr sensor heater malfunctions and ciircuit response malfunction codes, 4 all together, at the same time. then i noticed a stumble in park when revving the engine, does it mostly about 30-45 seconds after a cold start, will not do it when engine is first started. i was able to use the toyota scanner to turn up injector rate 25% which cleared the strumble when revving in park.. my question is... can the afr sensors cause that stumble or are they mainly emissions sensors?? i would not rather replace them right now if i have another underlying problem at hand. any suggestions??

    thanks in advance.

    chris

  2. I hae just purchased a 99 es300, being a toyota owner my whole life i know alot about these cars. on the radio, ironically, the lcd works fine, but the back lights for the presets, volume, and am-fm-cd, all do not work except for one, how are they replaced?? are they lcd or bulbs? is this something I can fix or does it need to go out for repairs? thanks for any help you can offer me.

    chris

    bump

  3. I hae just purchased a 99 es300, being a toyota owner my whole life i know alot about these cars. on the radio, ironically, the lcd works fine, but the back lights for the presets, volume, and am-fm-cd, all do not work except for one, how are they replaced?? are they lcd or bulbs? is this something I can fix or does it need to go out for repairs? thanks for any help you can offer me.

    chris

×
×
  • Create New...

Forums


News


Membership