Jump to content


1BigDog2

Regular Member
  • Posts

    11
  • Joined

  • Last visited

Posts posted by 1BigDog2

  1. Thanks for everyone's help with this problem earlier. I also found that the Lamp Failure module had burnt out as well (good prices @ Toyotapartscenter.net, if you don't mind waiting a few days).

    Anyway, new problem: power windows, DRL, Transmission position indicator, signal lights all quit at the same time

    I need help to figure this one out :cries:

    Thanks!

    Alternator/regulator OVER-charging the battery..??

    The meter looks good at start up and idle. Possibly a relay? I don't know how to test for that - if there is a way...I should have included that the rear wiper, radio also do not work. Fortunately, I can wait until Friday when the LF mod comes in. If I disconnect the battery for a short period will that reset any controls or computer?

  2. Thanks for everyone's help with this problem earlier. I also found that the Lamp Failure module had burnt out as well (good prices @ Toyotapartscenter.net, if you don't mind waiting a few days).

    Anyway, new problem: power windows, DRL, Transmission position indicator, signal lights all quit at the same time

    I need help to figure this one out :cries:

    Thanks!

  3. Do the side markers go on when you put the lights on?

    Yes they do. This is a strange one.

    There are three resistive nichrome wire links inside the bulb failure detection module mounted inside the driver's side rear quarter panel, about a foot forward of the cigar lighter socket. My guess is you "blew" the street/parking/corner light link somehow.

    I cannot seem to locate these. Are they behind an inside panel?

    Yes, behind the same panel the rear 12 volt source/cigar lighter.

    I checked on two different modules I found behind the panel, They looked ok, but I decided to look behind the tailgate panel - 'cause I saw a similar mod there. Lo and behold that one showed evidence of damage. Now to find a shop that has one! I'll let you know if that was it.....

  4. Do the side markers go on when you put the lights on?

    Yes they do. This is a strange one.

    There are three resistive nichrome wire links inside the bulb failure detection module mounted inside the driver's side rear quarter panel, about a foot forward of the cigar lighter socket. My guess is you "blew" the street/parking/corner light link somehow.

    I cannot seem to locate these. Are they behind an inside panel?

  5. Do the side markers go on when you put the lights on?

    Yes they do. This is a strange one.

    There are three resistive nichrome wire links inside the bulb failure detection module mounted inside the driver's side rear quarter panel, about a foot forward of the cigar lighter socket. My guess is you "blew" the street/parking/corner light link somehow.

    Is this area easily accessible and repairable? I will try and look at it this evening. Thanks for the suggestion!

  6. Do the side markers go on when you put the lights on?

    Yes they do. This is a strange one.

    There are three resistive nichrome wire links inside the bulb failure detection module mounted inside the driver's side rear quarter panel, about a foot forward of the cigar lighter socket. My guess is you "blew" the street/parking/corner light link somehow.

  7. :unsure: Hi all - I'm new to this (club and forum). I have a 2002 RX300 and replaced the OEM tail lights with LEDs. The brake lights work fine, but I have no lights at night. I put the original lights back on and have the same problem. The fuse is fine. Where do I look next to try and resolve this issue, before I go to the dealer?

    Thanks for your help!

×
×
  • Create New...

Forums


News


Membership