mil0881

Hi Everyone

a mechanic wanted to charge $380 for the part, Lexus wanted $295 plus taxes and Park Lexus wants $120 usd plus shipping and custom charges if any.

Guess I will order from Park Lexus as suggested by Steviej

It will also cost 1 1/2 of labor

Mike

it takes less than 30 minutes to change this sensor out. Just do it when the engine is cold. It's a tight squeeze on your arm and it gets wicked hot back there.

steviej

Thanks StevieJ

Hi Everyone

a mechanic wanted to charge $380 for the part, Lexus wanted $295 plus taxes and Park Lexus wants $120 usd plus shipping and custom charges if any.

Guess I will order from Park Lexus as suggested by Steviej

It will also cost 1 1/2 of labor

Mike

StevieJ

Thanks for all the help, it very much appreciated

Mike

P1135 = Air/Fuel Ratio Sensor Heater Circuit Malfunction (Bank 1 Sensor 1)

I am surprised they said they did not know. How did you phrase your question, or on the other hand, what exactly was their response?

steviej

"I am not sure what all that code means. If it is the one by the firewall that you need then it would be part number 89467-33060. That one is priced at $175.66 for the internet price. The best thing for you to do would be to get a mechanic to look at it and have them make the decision on which one you need. If you do that and it turns out that is the one you need (or if you need another one) then you can log onto our website www.newlexusparts.com and order it through there. Thank you for your inquiry with us, and I hope you have an excellent rest of the day!"

I managed to speak to them and got it all cleared up, I need the upper

The OEM part is made by Denso. You can get these online for about $120. here

Correct, Bank 1 Sensor 1 is the sensor between the exhaust manifold and the catalytic converter (hardest one to get at) on the side of the engine closest to the firewall/windshield.

steviej

Thanks Steviej

I emailed Park Place and they had no idea what error code P1135 is and they can't confirm if the upper oxygen sensor is the one I need to replace closest to the firewall/windshield.

Steviej or anyone is it the upper oxygen sensor I need to change?

Just want to make sure I buy the right one, especially since I have to deal with Canadian customs

Thanks

The OEM part is made by Denso. You can get these online for about $120. here

Correct, Bank 1 Sensor 1 is the sensor between the exhaust manifold and the catalytic converter (hardest one to get at) on the side of the engine closest to the firewall/windshield.

steviej

Thanks Steviej

Hi everyone

my check engine light came on and had it checked out and the error code was P1135, which is the oxygen sensor Bank 1 and sensor 1 (the one behind the firewall)

I wanted to know if anyone has a Lexus part number and who makes it for Lexus is it Denso?

Thanks for the help

take a look at this let me know if this helps

WIRE COLOR POLARITY LOCATION

Battery BLUE/YELLOW (+) RADIO HARNESS

Accesory GRAY (+) RADIO HARNESS

Ground BROWN (-) RADIO HARNESS

LF Speaker (+) GREEN

THESE WIRES SUPPLY THE LEFT AUDIO SIGNAL TO THE AMPLIFIER.

LF Speaker (-) RED

RF Speaker (+) BLACK

THESE WIRES SUPPLY THE RIGHT AUDIO SIGNAL TO THE AMPLIFIER.

RF Speaker (-) WHITE

Amp Location RT SIDE OF TRUNK

Steering Cntrls NO

Speed Cntrl NO

Radio Security YES

Hi BD Mobile Electronics

Thanks for the help, too late though

I took the stock amp out and replaced with another after market amp

Was it a 6 disk in dash or a single cd that you had in there before?

Sorry

I have a 6-cd in dash

I really want to use my Pioneer avic Z2, there is got to be a way to get the stock amp to work with my new deck.

Someone here must have come across this problem, please help!!

Hi

I hope someone can help me, I am doing an install of a Avic Z2 in a 2002 Lexus ES300 and can't seem to get the Amp to fire (no Sound)

grounds are fine and all is fine, Just wondering if some had similar problems and what did you do to get the Amp to fire.

Any help is much appreciated!!!

I needed instructions on programming the seat memory buttons on my newly acquired 2002 ES 300. Any help will be appreciated.

Hi

Your key has to be in the ignition and turn to the key the engine doesn't have to be running, gears have to be in park and the break engaged.

Setup you seat and mirrors the way you want and then press the set button and the seat 1 button at the same time and you will hear a beep

for seat 2 you do the same except press set and seat 2 at the same time till you hear the beep.

that's it

Hi Everyone

I searched everywhere and couldn't find answers. I want to change my stock 6 cd changer stereo to Pioneer Avic z2, but I would like it to look like original and not some patch work. Any help would be appreciated!

1- If someone can please post some pics, so I can see what it looks like for some ideas.

2- How is the fitment of a Stock Nav double din bezel with the Avic Z2? any gaps?

Thanks for the help everyone!

I was looking at these, but haven't gotten them

Maybe you can let us know how it turns out and looks

http://cgi.ebay.com/ebaymotors/ws/eBayISAP...:PIC&ih=018

Hi SW03ES

Unfortunately the 15 inch rims did not fit, they couldn't clear the calipers, I had to get 16 inch snows

thanks for the help

As long as the offset and bolt pattern are the same I don't see why not.

Thanks SW03ES, I was hoping you would answer, I think I am good with the offset.

Hi Everyone

Tried to do a search to see if a 15 inch rim will fit my 2002 es300, I want to put on some extra winters I have, but couldn't find anything so I was hoping one of you

es300 Guru can help a newbie out.

Thanks