DUBBCEE

Check the rear exhaust manifold. I had the same "turbo' sound above 2000 rpm. It was the exhaust manifold gasket.

Those Wheels are for a rear wheel drive car. They will not fit.

Hey guys, just saved an older ES 300 from being towed and she needs new shoes pretty bad. I tried searching, and from what I read the tires and offset might be an issue but I figure I'd check anyway since all these offsets and tire sizes and stuff hurt my puny little brain....

Here's the info, I really wanna find her some good shoes so I can actually start to drive her around (picked her up with two flat tires)...

toyota/lexus 17x7.5 wheels&tires - $500

FOR SALE IS A SET OF 17X7.5 RIMS MADE BY RTK WHEELS WITH A 5X114 BOLT PATTERN WITH A 48MM BACK SPACING.THEY HAVE 245X45X17 TIRES BY NAKOOK THESE WHEELS AND TIRES HAVE LESS THAN 2000 MILES ON THEM CAME OFF A LEXUS SC300.THESE WHEELS WILL FIT ANY LEXUS,TOYOTA,FORD,MAZDA,AND HINDA WITH A FIVE LUG PATTERN.

Agreed #6 is a likely suspect. Do some of the test as stated above or even test the anti-freeze for exhaust gas. Any one who has owned an 1992-93 ES with more that 150,000 miles on the dash can probably relate.

hi everyone i just have a simple question.ive been thinking about buying a front strut bar for my 1993 lexus es300.how well do they work?ive never had one on any of my cars.do they help in steering and control like there supposed to?my steering is a little loose nothing too crazy.but was thinking of installing one figuring it cant hurt.does anyone have any advice?has anyone one installed on there es300?any and all info is much appreciated thanxx

this was one i was looking to buy :

http://cgi.ebay.com/ebaymotors/TOYOTA-CAMR...sspagenameZWDVW

I've thought about that too. I don't think it will make much of a difference, unless your pushing your car to the limits and even then the average driver wouldn't notice much. Looks kind of cool, but that's about it.

Lexucan you so funny!!

If you can't find an "ES" emblem for your car, why not replace your "LEXUS" badge with a "CHRYSLER" badge and you're good to go...you know....CHRYSLER - 300 ?

Oh, but then you'd also have to swap out your whole interior and replace it with hard plastics, cheap vinyl and fabrics, ugly "bin box" knobs and switches, electronics that don't work, and parts that don't fit right.

So, on second thought, just keep looking for another "ES" emblem.

WHAOOOOOOOOO Never heard that before...... Just turn the radio up!

I also remember you noting that your leaking oil and it's smoking off the exhaust manifold. That's a potential fire hazard, but then at this point maybe the leaking coolant will quench any fire risk

LOL

LOL. Always remember to use fuses!!!! At minimum a 50amp. Air the car out and start all over.

i have a 93 es and recently installed an HID convertion kit in my stock projectors. It looks really nice and was very easy to install! i will take some pictures soon.. in my opinion its worth the money!

i did the same job,,,looks so nice.....hahha

I went with the 12,000k low beam and 6000k high beam. They look great!!

Don't worrie guys' they're old plates!!

i have a 93 es and recently installed an HID convertion kit in my stock projectors. It looks really nice and was very easy to install! i will take some pictures soon.. in my opinion its worth the money!

i did the same job,,,looks so nice.....hahha

I went with the 12,000k low beam and 6000k high beam. They look great!!

THE NEEDLES DONT LIGHT ON MY DASH, I THINK THIS IS COMMON ON SOME OF THESE CARS, COULD SOMEONE LET ME KNOW HOW TO FIX THIS PLEASE? THANKS, RUSS

My 2 long needles also died, I got 2 long needles in good condition via ebay and replace the backlight with 8 leds. It's super white backgroung with red led needles.

Where did you find all the parts to do this. I have the same probs.

Lextech.com has some cool stuff. Half-way cheap.

BTW, what DOES your friend have??

He doesn't want to say? Maybe a kia? lol