John Hanlin

I have just the opposite problem.  Thanks for checking.

Thanks for the reply.  I had this problem with my 2004 RX, but the opening spring is fine on my 2007 RX.  It is the latching pin staying out and interfering with the closing latch..  Each time I get gas I have to open the hatch and pull the "emergency" opening strap while I push the filler door closed.  Good thing the filler door and inside release are on the same side so that I can reach them at the same time.  Annoying but fixable if I take the inside panel off.  Didn't know if there was an easier solution.

Forgot to mention -  2007 RX350

Filler lid opens fine from inside, but won't close without pulling the emergency strap inside the hatch.  Any suggestions?

John