Jimbo1285

I dunno. Put a huge 101mm turbo on it and run a 4 inch exhaust like I did. If you bought the mufflers and your now trying to design the exhaust, I think your rearranging furniture on the Titanic at this point. You design the mufflers around the exhaust not the exhaust around the mufflers.

Mike.

←

i had my exhaust done already like a month ago. and it is not bad at all. i had the car dyno. ppl say that most SC400 has around 180-185 somewhere around there at the wheels i have 203 i think the exhasut helped a lot. i used 2.5 crush bent piping

i brought some mufflers from ebay. now i jus dont know what size piping 2 use. i was thinking maybe 2.5 crush bend all the way. i also dont know if i want 2 keep the y pipe or x pipe down there. any good suggestions??? dont want 2 lost any low end at all

sorry dont know much about the mass air flow. my check engine light turned off for some reason i dont know. but i found out what 26 means. it was something about running too rich. im just going to give my car a tune up first. i also read that it can be the ign. coils. problem for running too rich. i only get around 230miles per full tank and i think i should be getting over 300 per tank. hopefully the tune up will take care of it and the check engine light

my engine check light came on yesterday and then turned off. today it turned on again. I tapped the E1 and TE1 together. It gave me a code 26. also the Overdrive light starts to blink too. What can be the problem??? and what is code number 26?????

can anyone sell me a copy of the factory service manual CD

←

what year is your car 92-96 or 97-99?

←

1993 SC400

i did my fuild change yesterday. about 4 qts. came out is that too much??? i put back in 4qts.

its only dripping very very small drops right now. and i dont have anytime 2day 2 chnage it. but i still need to drive it. think its OK to drive it 2day jus for a little bit till 2morrow????

can anyone sell me a copy of the factory service manual CD

i changed the fuild today and the filter> when i put the pan back up with a new gasket it leaked> i guess i torqued the bolts too tight and broke the gasket anyone have the torque spec for the pan bolts thanks

Are these lowering control bushing hard to change??? i only have the problem on my driver side

93 suzuki swift. totaled that car. I flip it.

90 acura integra Still have this car just for school

03 Lexus RX300 Sold it. Really miss it though :cries:

Can you send me the wire diagram for the harnesses in the back for the amps and changer

My friend jus got his SC400. the speakers on the car sound very low. the head unit works and powers up but the disc changer don;t work anymore. can it be the amps or is the head unit jus broken??????

Just wonder if any meets are coming up soon in Bay area???

lexus dealer do sell the fuel and temp needles alone. the temp needle is like 70 bucks and the fuel is like 240

Hey! anyone have any 18 or 19 inch rims for sale with some OK tires. I would really like some C2's or look a like's are ok too. ready to pick up in bay area???Email me at(aznwonton1225@hotmail.com) thanks

i need a set of wheels for my sc400. I found a set of rx330 wheels do u think it'll look good on my car. if anyone done it please send me some pics. thanks???

Can i put 245's or 235's on my stock 16 inch rims

?

my friend is selling me some 18' volk's. with 245's in the rear and 225's in front . will thesae affect the ride a lot driving in the city????

Is there and ignition systems out there for my SC400. Such as MSD or Jacobs system.

I just want to know how reliable are ES300's. How many miles do the es motor go up to? What can i get with around $6,000?

my stock alarm goes off when i remote start my car is there anyway to bypass it??? I had the after market alarm hooked up to the stock alarm.

i also have a gray sc400 but i was maybe thinking about getting some gold rims like the volks ce28's. but sliver rims like some racing hart C2 will make the car look pretty clean. plus they make the car look a like sporty

I got it installed. it was the black wire. on the bottom coil. i looked at my friends car it was also the black wire but on the top coil. does it make a difference??

I'm installing my alarm right now and I don;t know which Wire to tap for the ign. I hear it was the black wire on the bottom of set of wires on the ign. coil. My car is a 93 sc400 . is there any difference between the years of SC400 where the ign coil wire is also???