Vick22

HI all i just installed my new aftermarket radio... Pioneer 6300... into my 98 LEXUS ES300

after finishing all the installation my radio works but there is so much noise coming like "whistling" distortion type.. its coming from speakers even though i bring volume to ZERO.. i dont know what wrong i did.. but i checked back all my instructions and wire connection all is good...

i used METRA 70-8112 wiring harness... with RCA wires... just can not figure out what is going on ..another thing that wiring harness has power antenna wire i dont know where to connect that .. coz pioneer radio has nothing called anenna supply wire.. any help will be appericiated..

after searching here and there Got the dash kit and harness :)... make is metra "Metra" ... now just thinking what kind of deck would be good .. :)

thanx a lot guys for taking time to read and reply... means a lot..

there is a ring on axle for abs sensor... that ring has teeth .. according to your explanation it seems like that one of the ring's tooth is chipped u have to remove the axle and inspect it...

Hi All..

Lexus 98 ES300

I just wanted to put "white light bulbs" like i have yellowish lights at night... ..

i heard cheap lights burn the wiring harness.. so which make white lights would be better??? for high beams, low beams and Fog Lights.. watts are 65w 55w and 55w respectively.. thanx for help..

Ebay if you are comfortable, if not I'm sure a google search will turn up plenty of options.

ya i saw quite a bit on ebay and im not really confy with ebay.. i'll ask at best buy and compare with ebay and choose the best outcome,.. thanx for ur help..

When the engine is running, remove the cap and look for signs of air bubbles/aeration.

nothing obvious that i saw what i did is sucked fluid out of the reservoir.. and now noise is little less that means i have to change the complete fluid?? coz the fluid that came out was pretty dirty and black.. thanx for your help

You should be able to get a harness adapter so you don't have to cut anything. There is a mounting kit available as well that will replace the dash trim and add a pocket under the radio. Should be a rather straight forward install.

thanx for replying... thats good to hear no need to cut wires.. so where can i get the wiring connector and dash kit??

i checked the fluid level and it was fine

whenever i start my car i hear a whining noise more evident when car is cold and when i turn steering.. i tried to pin point the location and it seems like power steering pump since noise goes louder when i try to steer parked car.. so that means i need new pump? or can i change bearing in it?

Hi i have 98 Es300 and i wanted to install single DIN radio and remove the stock radio. i was wondering what parts will i need?? like what wiring conector? and what wires need to cut and the fitting kit? any help is highly appericiated