Gamer

That looks horrible.

What kills me most though is that he used my Soarer for the photoshop chop job. :chairshot:

Here are some pics of the car as it is normally...

Soarer TT

I use:Diamond Audio HEX Series S600s Up front.

4. Free-Air subs no longer exsist. You will have to make do with one made for a box

Some free air subs...

Pioneer

Another Pioneer

I estimate about 320-340+ at the rear wheels running 1.2bar/17.5 psi on the stock turbos,

It has had quite a bit done to it and is still in the process of being upgraded. Once it is all done I will make a proper post listing all the mods.

I'm no tire expert, but i think you should go with a staggered set up. because our car is rear wheel drive and it look great. The offset should be around +38mm and +42mm and it shouldn't rub. I have 18X8 front and 18x9 rear with +38mm offest all round. My car is also 2" drop and it still doesn't rub. I'm running on tires size 225/40/18 FRONT 245/40/18 REAR. But do check with professional before you buy anything. I hope this help.

←

Actually the correct offset is +50 so as close as possible to that and you will retain better handling.

I run:

18x10.5 Rear, offset is +49 (275/35/18)

18x9 front , offest is +45 (245/40/18)

Just slapped on a new set of Veilside Andrew Golt dish wheels....

I would have to disagree on the looks.... I think the stock shifter looks bland and outdated.

I have the Levoc installed on mine and I think it looks miles better then the stock one.

I use HKS SuperFire Racing Iridium plugs (s40i, heat rating 8), Keep in mind that I am running the 1JZ-GTE twin turbo at a high boost level (1.2bar/17.5psi), well high boost for the stock turbos.... So they would be overkill for the sc300/400 n/a

But if you are going turbo or already are then these would be a very wise (somewhat expensive) choice.

Thanks for the replies guys....

I have gone ahead and bought the JIC FLT-A2 Kit, I should have them fitted sometime in the next 10-15 days ;)

Need some opinions on which choice you would go for and why....

1. HKS Hypermax II

2. TEIN Type flex with EDFC (Electronic Damping Force Controller)

3. JIC FLT-A2

All three can be found here....

Soarer Coilovers

Thanks

Ah crap, hehe, thats right :chairshot:

Sorry

My kit was purchased from Austrailia and I highly recommend it.

Import Scene

Go for Metallic walnut burl as it is the closest match... ;)

Some pictures of my Soarer 2.5 TT can be found here.....

Soarer TT

;)

And....

Here is a pic of mine... (wood)

You might notice a difference or two ..... (Jap spec 2.5 Twin turbo) ;)