johnmike21

Hey @choward1103 it’s very easy but you most likely will scrape some knuckles like I did. The entire assembly had to be replaced since it’s LED. Pry off the panel inside the trunk with a flathead screwdriver or a small plastic pry bar. Then stuff a rag down in the space to catch the nuts in case you drop one. Reach inside the panel and they’ll be three bolts that need to come off. One is easily accessed, the other two are up inside so you’ll have to do a little contortion to reach them. You may need a wrench to loosen them, and to tighten them when you put the new light assembly in. No need to over tighten, just a half turn or so to secure the nuts from vibrating off. Connect the wiring and test the lights before bolting it in. it’s an easy project for a novice, I’ve never done anything on cars except change fluids, and I was able to do it. Good luck. i know you didn’t ask, but wanted to include for anyone in the future: make sure you order the correct side assembly - right side/left side. i got mine off Amazon for about $90 each: AM Autoparts Left Outer Rear Tail... https://www.amazon.com/dp/B0962P99PD?ref=ppx_pop_mob_ap_share

Thanks for your help @RX400h. Replacing the brake light assembly was a piece of cake.

Hey gang The middle vertical lights are dead on my left brake LED lights. is there a way to fix/replace them, or do I have to replace the entire brake light assembly? The dealer wants over $700 to replace the entire assembly. If I do need to replace it does anyone have a good video showing how to do it please? And a good online source to purchase one? I’m a true novice when comes to this stuff. Thank you for any assistance! John Right side for comparison: