nicky4318

my cd changer will not change disc when button is pushed.

anyone had this problem and if so , what is the solution?

any help would be appreciated.

Haven't loaded any new cd's lately, cd's are loaded properly.

now wondering if it is due to the cold weather we are experiencing lately.

temps should go up next few days or so ,will try it then.

my cd changer will not change disc when button is pushed.

anyone had this problem and if so , what is the solution?

any help would be appreciated.

HEY just acquired a 1992 sc400 and i am looking for a Grey driver side door panel as mine is coming apart also i have no radio and no power to it i checked the fuse and every time i put a fuse in it it blows instantly and i am wondering what the cause it even if the car is off i was told it was the cd changer so i disconnected it and still have same problem i am wanting to put an aftermarket kenwood deck in but i am not sure how the speakers are wired and they must have a crossover or something i am wanting to use all original speakers but don't know how to hook up my amp correctly to them.

again i am new and if i put this thread in the wrong place or something i am sorry and please have patience with me i am only wanting to get some help so i can take care if my car thank you

I HAVE HAD GREAT LUCK WITH THE CAR AUDIO GUYS AT MY LOCAL BEST BUY.

THEY WILL INSTALL YOUR NEW KENWOOD SYSTEM FOR AROUND 50 TO 75 BUCKS.

TRY E-BAY FOR DOOR PANEL.

GOOD LUCK ....NICKY4318

RECENTLY MY CHECK ENG LIGHT CAME ON.

I CONNECTED MY OBD2 SCANNER AND CAME UP WITH CODE (P1600 ECM BATT MALFUNCTION).

I TRIED PULLING FUSES AND DISCONECTED BATTERY IN AN ATTEMPT TO RESET COMPUTER..WITH NO RESULTS.

ALSO TRIED TO ERASE CODE WITH SCANNER AND COULD NOT DO SO.

ANY SUGGESTIONS?

WILL DO..AND THANKS.

I HAVE A 1995 LS400 WITH 64.000 MILES ON IT.

RECENTLY MY CHECK ENG LIGHT CAME ON, USING MY OBII I CAME UP WITH TROUBLE CODE P1600 (ECM BATT MALFUNCTION).

I TRIED TO ERASE THIS CODE BUT COULD NOT DO SO.

ANY SUGGESTIONS?