Rice4eveR

hahaha Rice4noW i like that! ive been in a 100 or so car wrecks from splitting cars in half to running off of cliffs and flipping *BLEEP* over... I have also been in the car repair, racing, and modification biz for 16 years. in my personal opinion airbags do more bad then good but thank you tho

I looked and looked for a hub/steering wheel for my 93 Ls400 and could not find one anywhere~ I had an extra 96-2000 honda civic Momo hub and steering wheel laying around my shop so I took off my factory lexus steering wheel to try it out and it fit! a direct bolt on no mods! WTF?!?! the only issue is you loose cruise control and horn (you have to rewire them somewhere else to keep them). I don't use the CC and I just moved the horn on mine.

Thank you for reading!

Rice (Himself)

Bend and cut the legs into feet like the one below

Don't burn yourself with the iron!

Yeah like the pic says... I screwed up and ripped off the copper lead rushing, so I took a probe and scratched the green coating off the board so that I could have a new spot to solder

Looks great and doesn't flicker anymore, cold or hot! I hope I don't make the dudes that charge hella money on eBay mad... but ****um! half of them charge to much for the service anywaY!

click on the little album cover in the pic...!

As always I had a blast teaching you somethin' new!

Thank you for reading!

Rice Aka Rice4eveR -Bullrun season 1 team civic-

REVISED*For people with some technical knowledge only* Do this at your own risk!*

Hi... My name is Rice. I wasn't gonna pay 1200 bux to get my 93 ls400 Lexus cluster to stop flickering and my gas gauge working again! Here is my permanent fix. It cost me $3 or $4 bucks! If this thread is helpful to you then show your support by going to my website and downloading my music! its totally free! www.Rice4eveR.com

Here is my cluster. I just took it out and I'am ready to get to work! The whole job took me 12-15 mins but I was a technician for like 15 years so please take your time!

Back of the cluster. take the white plastic cover off. It is held together with 10 or so screws!

I bought these capacitors from Frys electronics. If you don't have a Frys near you then hop your !Removed! on www.Frys.com and order them by the part numbers provided below!

The labels with prices and part numbers

Unsolder (from the top side) capacitor from c212 that is located on the small board and replace with a 10 uf (10mfd) 16 volt capacitor.

Do the same for c142 and c147 located on the big board! C142 is to be replaced with new capacitor 4.7 Uf 25 volt and c147 is to be replaced with 10uf 50 volt.

Super small

Do the same for c142 and c147 located on the big board! C142 is to be replaced with new capacitor 4.7 Uf 25 volt and c147 is to be replaced with 10uf 50 volt.

Super small

Bend and cut the legs into feet like the one below

Don't burn yourself with the iron!

Yeah like the pic says... I screwed up and ripped off the copper lead rushing, so I took a probe and scratched the green coating off the board so that I could have a new spot to solder

Looks great and doesn't flicker anymore, cold or hot! I hope I don't make the dudes that charge hella money on eBay mad... but ****um! half of them charge to much for the service anywaY!

click on the little album cover in the pic...!

As always I had a blast teaching you somethin' new!

Thank you for reading!

Rice Aka Rice4eveR -Bullrun season 1 team civic-

REVISED*For people with some technical knowledge only* Do this at your own risk!*

Hi... My name is Rice. I wasn't gonna pay 1200 bux to get my 93 ls400 Lexus cluster to stop flickering and my gas gauge working again! Here is my permanent fix. It cost me $3 or $4 bucks! If this thread is helpful to you then show your support by going to my website and downloading my music! its totally free! www.Rice4eveR.com

Here is my cluster. I just took it out and I'am ready to get to work! The whole job took me 12-15 mins but I was a technician for like 15 years so please take your time!

Back of the cluster. take the white plastic cover off. It is held together with 10 or so screws!

I bought these capacitors from Frys electronics. If you don't have a Frys near you then hop your !Removed! on www.Frys.com and order them by the part numbers provided below!

The labels with prices and part numbers

Unsolder (from the top side) capacitor from c212 that is located on the small board and replace with a 10 uf (10mfd) 16 volt capacitor.