Rx300 Key Programming

[natmed]

I am getting a new key from my local dealer and wondered if anyone knew what the sequence was for programming the key? I have a 2001 Rx300.

Thanks,

Sean

[natmed]

I found this procedure. Can anyone verify that it works?

1. Open vehicle's driver side door (leave open).

2. Using the electronic lock/unlock button found on the door's armrest, cycle through lock/unlock five times (lock-unlock,lock-unlock,lock-unlock,lock-unlock,lock-unlock).

3. Close door.

4. Open door.

5. Repeat step 2 - cycle through lock/unlock using electronic lock button on the door's armrest five times (do not manually lift/depress the lock button).

6. Insert the new key into the ignition and turn to the ON position.

7. Turn key to the OFF position and remove.

8. Simultaneously depress and hold the remote's PANIC and UNLOCK buttons. During this time the vehicle's security module is performing the program function. The security mode LED will flash during this process.

9. A beep or chime signals the end of the program function. Release the PANIC and UNLOCK buttons. The door lock and panic functions can now be controlled via the new remote key.

Sean