Jump to content

Recommended Posts

Posted

I just recenlty bought a 1991 LS400 with 189,000 miles. I bought it knowing the the A/C didn't work. I was going to recharge it. I checked it out and it hadn't been converted yet. So i went about converting it and when I did the pressure check there was no pressure so I assumed that there was no R-12 in it. So I began to inject the R-134 in it when I realized I didn't have a good seal and my pressure was good, but I had already injected a small amount of R-134 in to the system. So my quesiton is this. Is it bad if there is a small amount of R-134 mixed in with the R-12? Also no that I have done that my AC light flashes. I cant read any of the codes because my LCD is blacked out. Any ideas on what the problem for the no A/c would be as well


Posted

One thing I have noticed is that my A/C light blinks when the car is started. I cant read any of the LCD codes beacause my LCD display is bad.

Posted

No residual pressure = no residual refrigerant was in the system. There were recent threads on recharging the '91 LS400 and they answer the questions you have posed.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...

Forums


News


Membership


  • Unread Content
  • Members Gallery